MP2681GS-Z

Monolithic Power Systems (MPS)
946-MP2681GS-Z
MP2681GS-Z

Fabricante.:

Descrição:
Gerenciadores de bateria CC/CV Controller Full Protection

Modelo ECAD:
Baixe o aplicativo gratuito Library Loader para converter este artigo para sua ferramenta ECAD. Saiba mais sobre o Modelo ECAD.

Disponibilidade

Estoque:
Não estocado
Tempo de entrega da fábrica:
14 semanas Tempo estimado de produção de fábrica.
Mínimo: 2500   Vários: 2500
Preço unitário:
-,-- €
Ext. Preço:
-,-- €
Est. Tarifa:
A remessa deste produto é GRATUITA

Preços (EUR)

Qtde Preço unitário
Ext. Preço
Bobina cheia (pedidos em múltiplos de 2500)
0,74 € 1 850,00 €
0,723 € 3 615,00 €

Opção de Embalagem

Fabricante Nº de ref.::
Embalagem:
Reel, Cut Tape
Disponibilidade:
Em estoque
Preço:
2,78 €
Mín:
1

Atributo de produto Valor do atributo Selecionar atributo
Monolithic Power Systems (MPS)
Categoria de produto: Gerenciadores de bateria
RoHS:  
Charge Management
Lithium-ion, Lithium Polymer
5 V
15 mA
4.5 V to 30 V
SOIC-16
SMD/SMT
MP2681
Reel
Marca: Monolithic Power Systems (MPS)
País de montagem: Not Available
País de difusão: Not Available
País de origem: Not Available
Temperatura operacional máxima: + 125 C
Temperatura operacional mínima: - 40 C
Sensível à umidade: Yes
Corrente de Alimentação Operativa: 500 uA
Pd - Dissipação de potência: 1.6 W
Tipo de Produto: Battery Management
Quantidade do pacote de fábrica: 2500
Subcategoria: PMIC - Power Management ICs
Produtos encontrados:
Para mostrar produtos similares, selecione pelo menos uma opção
Selecione pelo menos uma caixa de seleção acima para mostrar produtos similares nesta categoria.
Atributos selecionados: 0

TARIC:
8542399000
CNHTS:
8542319000
USHTS:
8542310030
JPHTS:
854239099
MXHTS:
8542399901
ECCN:
EAR99

MP2681 CV/CV Controller

Monolithic Power Systems MP2681 CV/CV Controller is designed as a highly integrated Li-Ion or Li-polymer switch mode battery charge controller with full protection and status indication. The device integrates a precision voltage reference and charge status indications suitable for AC adapter input and cradle charger applications. The MP2681 automatically detects the battery cell through a battery ID resistor and regulates the battery voltage according to the corresponding cell configurations: 3S1P, 3S2P, 4S1P, 4S2P, 5S1P and 5S2P. Then, the AC adapter output is automatically regulated according to the battery configuration chosen. In addition, if the battery pack does not have an ID resistor, the designer can configure the charge termination by setting a dedicated voltage to the ID pin according to the six pre-set VID values representing each battery configuration.