STEVAL-LLL015V1

STMicroelectronics
511-STEVAL-LLL015V1
STEVAL-LLL015V1

Fabricante.:

Descrição:
Ferramentas de desenvolvimento de iluminação LED 96 LEDs Panel Evaluation Board based on LED1202

Vida Útil:
Novo Produto:
Novo no fabricante.

Em estoque: 3

Estoque:
3 Pode ser enviado imediatamente
Tempo de entrega da fábrica:
3 semanas Tempo estimado de produção de fábrica para quantidades acima do indicado.
Mínimo: 1   Vários: 1   Máximo: 10
Preço unitário:
-,-- €
Ext. Preço:
-,-- €
Est. Tarifa:
A remessa deste produto é GRATUITA

Preços (EUR)

Qtde Preço unitário
Ext. Preço
51,43 € 51,43 €

Atributo de produto Valor do atributo Selecionar atributo
STMicroelectronics
Categoria de produto: Ferramentas de desenvolvimento de iluminação LED
RoHS:  
Evaluation Boards
LED Driver
Bulk
Marca: STMicroelectronics
Tipo de Produto: LED Lighting Development Tools
Subcategoria: Development Tools
Ferramenta para avaliação de: LED1202
Peso unitário: 25,600 g
Produtos encontrados:
Para mostrar produtos similares, selecione pelo menos uma opção
Selecione pelo menos uma caixa de seleção acima para mostrar produtos similares nesta categoria.
Atributos selecionados: 0

USHTS:
9023000000
ECCN:
3A991.a.2

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

STEVAL-LLL015V1 96 LEDs Panel Evaluation Board

STEVAL-LLL015V1 96 LEDs Panel Evaluation Board features 96 individually controlled LEDs managed by eight LED1202 drivers, all connected to the same I2C bus and synchronized via a master clock. Each LED can execute an 8-step pattern sequence (single-shot or repeated), programmable through the STSW-LED1202GUI. Create and debug lighting effects using a simple scripting language within the GUI before downloading the scripts to the board. Once downloaded, the board runs the scripts independently without requiring PC software.